 |
|
» |
|
|
|
|
|
|
» |
|
|
» |
|
|
» |
|
|
» |
|
|
|
|
|
|
» |
|
|
» |
|
|
» |
|
|
|
|
|
|
» |
|
|
|
|
|
|
» |
|
|
|
|
|
|
» |
|
|
» |
|
|
|
|
|
|
» |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
ProCurve Gigabit 1000Base-T Mini-GBIC (J8177B)
Pluggable Gigabit transceiver (RJ-45) for up to 100m over Cat 5 cable or better.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ports
Connector: RJ-45
Duplex: full
Physical characteristics
Dimensions: 2.56 x 0.55 x 0.57 in. (6.5 x 1.4 x 1.46 cm)
Weight: 0.05 lb. (0.02 kg )
Environment
Operating Temperature: 32°F to 158°F (0°C to 70°C)
Operating Relative Humidity: 5% to 95%
Non-operating/Storage Temperature: -40°F to 167°F (-40°C to 75°C)
Non-operating/Storage Relative Humidity: 5% to 95% , noncondensing
Cabling
Type:
- 1000Base-T: Category 5 (5E or better recommended), 100 Ω differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000Base-T
Maximum distance: 100m
Notes
For use with J4885A, J4894A, J4878B, J4893A, and J4908A.
When used in the ProCurve Switch gl 10/100/1000 Module (J4908A), the J8177B Mini-GBIC can be installed in either the upper or lower Mini-GBIC port, but will block access to the other port.
Requires specific code version for support.
- For use with 9300 series modules, requires code 7.08.00a or greater.
- For use with 5300 series modules, requires code E.09.11 or greater (excluding E.09.21).
- For use with 4100 series modules, requires code G.07.69 or greater.
Not supported on dual personality ports. Not supported on 9300 series non-EP modules (J4857A, J4856A).
|
|
|
|
|
|
|
